1 / 4
E-flite P-51D Mustang 1.2m 12 inch 2 blade spinner / nose cone
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Should work for the new version of p51d as well. This is a 2 blade spinner for APC 12 inch blade, I only have a 12x6…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Should work for the new version of p51d as well.
This is a 2 blade spinner for APC 12 inch blade, I only have a 12x6 blade, but it should work for 12x7 or 12x8 as well I think. According to my calculation 12x7 or x8 should provide similar performance as the stock 4 blade.
You might need to print the spacer to be placed behind the props, Otherwise the blade will collide with the stock spinner plate.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Category: R/C Vehicles