Assassin's Creed Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assassin's Creed silhouette
- Ocena
- 4 / 5
- Polubienia
- 37
- Pobrania
- 91
- Wydruki
- 2
- Wyświetlenia
- 681
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
this print is on a bambu with dimensions of 110x220 so you may have to scale it down a little bit depending on what size your print bed is
2 files available, one is a project file that you can load right into bambu studio. Printed with a p1s. Also added the stl file so you can load into your own slicer and add in the layer changes.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #11 (1.04mm) swap to Blue
At layer #15 (1.36mm) swap to Gray
At layer #21 (1.84mm) swap to Jade White for the rest.