Rotating Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool that makes de-icing fun by rotating the blades.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
With this tool, de-icing windows becomes a real adventure. Thanks to the handle, the "Rotating Scraper" can be held easily and stably, and the blades can be rotated with the other hand. This means de-icing in the early morning is finally fun.
You need the following:
- 1x blades+axis
- 1x op handle
- 1x handle
- 3x M4 threaded inserts
- 3x M4x15mm screws
The components are easy to print. You can use PLA or PET filament. Select sufficient infill and perimeter (min. 20% and 2 walls). The “Top Handle” component can be printed without support material. After printing, loosen the ball knob by turning it, after that it shoud rotate easily.
After printing the parts, the thread inserts should first be inserted into the “Blades+Axis” component. The handle can then be put on. Finally, just place the last component on top and fasten it with the three M4 screws.
The “Rotary Scraper” is ready!
Have fun with this tool! :)