Prusa XL series:Double 1kg Spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I notized that it would be neat,be able to not only use 2kg, but 2x 1kg spools. so i modified the Original spool holder
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 939
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Beliefe it or not, but we are note able to use 2x 1kg Prusament Filament spools on one spool!?!
So i modified the Original spool holder. The old one could hold 2x Overture Filament…but not our beloved Prusament. Why didnt they think about it? Dont know… I modified the part, so that you only need to print 1 NEW part of the original 3 part Filament holder.
Now the elongated spool arm, is able to hold 2 separate 1 KG spools at the same time.
Have in mind, that it would be best, to put the 2 spools on the arm in a way, so that they do not unwind each other, when printing.The main image has arrows as an example.
The 3mf File contains all 3 parts for a whole Spool holder,
But if you use the old parts, you will only need:
telescopic-spoolholder-base (1)
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114