HexScraper - A multifunctional windshield scraper.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HexScraper - A multifunctional windshield scraper. Tighten / Untighten hex nuts! (8, 10, 13, 17mm) Ice kick-back design.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello!
I would like to start by saying that this is the first design that I publicly share, so feedback is welcome.
I present you, The HexScraper - A multifunctional windshield scraper.
Designed to be useful to most drivers, it has hex nut cut-outs for the most common sizes found on cars, 8, 10, 13, and 17mm.
With an ice or snow throw-back design, to keep our hands as warm as possible while defrosting, and leaving a clean trail behind, thus if we go from top to bottom, we get a clean scrape with no leftover.
Made it two sizes, one bigger, more robust, with a handle to provide more grip and torque on the task, be it defrosting or tightening / untightening a nut, and one smaller, more portable and versatile, whilst still keeping the initial vision.
*DISCLAIMER:
The scraping has not been tested, so feedback is welcome. (Did not have a frosted windshield yet)
The hex nuts work good in my testing.
Print Suggestions:
From my testing, I've only tried PLA:
0.15mm Layer Height
20% standard infill