CSM larger crank arm with counterweight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crank arm with more Oomph!
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 206
- Wydruki
- 2
- Wyświetlenia
- 702
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This crank arm gives a little bit more room and power, especially useful while knitting with the ribber and more or thicker yarn.
I noticed while making a e-wrap selvedge that my old crank arm wasn't able to transmit more power evenly (!) to the cam shell, so I thought, maybe bigger is better in this case ;-).
To compensate its bigger size the counterweight box is also a bit larger.
I printed the handle with 35% infill and with support. See picture how to print best with least amount of support.
The arm works great in combination with my larger crank handle:
https://www.printables.com/de/model/653343-csm-larger-crank-handle-with-bearing-support
EDIT 18/12/23
Added some more screw holes to the lid to better lock it down, especially if you use some wadding to silence the BBs…