M2-M8 Socket Holder (1/4inch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/4inch M2-M8 Socket holder for pegboard with custom holes on back for your own hooks. Freely removable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
1/4inch M2-M8 Socket holder for pegboard.
Has 0.3-inch holes on the back to put your pegboard hooks. Holes are spaced the normal width of US pegboards (1 inch apart).
I printed my own hooks which had a longer part underneath to hold the socket holder. You can use normal hooks or design your own which can grip the bottom of the sock holder tray. From the middle of the hole to the bottom is 1.42inch.
Designed so you can freely remove the whole thing and bring all the sockets with you while maintaining an organized pegboard for all your tools.
Print/Design info:
- Inventor 2024
- SuperSlicer
- Ender 5S1
- Hatchbox PLA
- 0.2 Resolution
- Infill is your preference (I did 20% to be sturdy)
- Print with the bottom of the holder on the surface of the print tray. Add supports for the pegboard holes.