Fastener plug for a Subaru car.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took my car to a car wash, and lo and behold, they managed to lose 2 of my car's trunk plastic plugs. So i made one.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 1236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Took measurements from one of the retainer pins that my car had left in the cargo trunk area and made a 3d model.
The car is a 2001 Subaru Impreza so i'm guessing the Subaru cars around that year would use the same.
Better print the model laying down and cut in half instead of standing up because the car's plastic will be probably pulling on it and so the layers might eventually wear out? I guess?
Needs no support if printed standing or laying down and cut in half.
Printed them in PETG and so far they hold up.
If you liked this thing enough (and was hopefully useful!), please consider supporting me via Paypal in doing more stuff like this! https://www.paypal.com/donate?business=XH9JMVWXCULKS¤cy_code=EUR