ZWO AM5 Faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A functional faceplate replacement for the AM5 astronomy mount.
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 1379
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created this replacement faceplate for the AM5 mount to better facilitate cable management and to provide some extra mounting points for bits and pieces.
The cross in the centre has a standard 20mm spacing with threaded M4 screws found on a lot of astronomy mounting plates. The threads are printed in the model, but I recommend running an M4 tap through to clear them out.
If you use the V1 model with the 3x M3 screw holes down each side, these are for custom attachments. Like the centre these have the threads in the print, but I recommend running an M3 tap through to clear the thread.
I've printed this in PETG, 0.2mm layer height.