ACURITE PM 2.5 Temp & Humidity Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick solution to a mounting problem I had with this air monitor
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a way to mount this air monitor to the wall in such a way that I could still feed the USB power cord to it and not put any strain on it and not incumber any airflow to the meter. Its a rough design and remix and change it up as you see fit.
Printed in PLA, .02 generic PLA quality settings in Prusa Slicer, with 20% infill. Print it flat on its back and no supports are needed when printed on a MK3s
In the picture, its mounted to a door jamb. There is enough angle for a perfect fit.
I have included the Fusion 360 file to modify it as you need.