1 / 5
Prusa XL series: Cable protecting toolbase clip (must have) — zdjęcie 1
1 / 5

Prusa XL series: Cable protecting toolbase clip (must have)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Clip to replace the first one at the Toolbase. This prevents Docking problems and protects the cable from wearing off

Ocena
4,99 / 5
Polubienia
356
Pobrania
1960
Wydruki
114
Wyświetlenia
6180
Oceny
104

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

After watching my XL print,  i noticed a bad behavior that could only be solved by a new part. 

I really think this is a must have part. I get that prusa(as every other manufacturer) want to have as short as a part list as possible.But this really needs to be implemented in their future design change! And i hope they use my design! And prevent damaged cables fornthe end consumer

A Clip to replace the first one at the Toolbase.NOT THE FIRST AT THE TOOL

 This prevents Docking problems and protects the cable from wearing off. The video clearly shows the problem, and my 2 Month running XL is already showing damages at the cable. So please replace the first Cable clip at the base!

 On the left you can see, what a difference it makes. On the right side, you can see the old clip in action.

 

For those who think i saved their printer, you now have the chance to thank me by tipping me on KO Fi!

Tip me on KO-FI by klicking here:

                                                      https://ko-fi.com/surfalex2000

Check out my other optimized XL Parts! There is a Series to come!

You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114