V60 Size 1 paper Filter Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V60 Size 1 paper Filter Container with a Lid to keep filters clean
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 1096
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Container with a Lid for a V60 SIZE 1 paper filters
I wanted a box with a lid so the filters don't get dirty while not in use and i designed one
BONUS: Box fits more Filters than a single bag (100), so you don't have to wait until you finish them to refill
Printing:
Print on the back of parts as in the photo below, and add manual supports only for the larger holes in the Lid
print with a brim to prevent warping
Additional Hardware:
x2 M2x16 or longer Hex screws (ISO 4762)
x2 M2 Threaded Heat insets (any length will do) max outer diameter of 3.4 mm
Assembly:
- Clean printed parts from brim and supports
- insert the threaded Heat inserts into the Base part
- put the lid on top and screw in the screws (the tighter you screw them the more rigid the opening and closing of the lid will be)
ENJOY
P.S: Comment if you want the box for size 2 and 3 filters as well and I'll add prints for them