TPU/PLA Hybrid Box - Square Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A square box with a TPU hinge/cover and a PLA shell.
- Ocena
- 5 / 5
- Polubienia
- 134
- Pobrania
- 520
- Wydruki
- 4
- Wyświetlenia
- 4182
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a single print hinged box that is printed with TPU for the first three layers and PLA for the remaining layers. It works well as a case for wired earbuds or other small items. They fit pretty well in the pockets of my jeans.
Temperatures: ~210C nozzle temp for both filaments, 50C bed temp
Infill: 100% (don't worry, this print is almost all perimeters)
Layer height: 0.2mm
Print speed: I use ~30mm/s for all the TPU layers.
Flow rate: I increase the flow rate from the default 95% up to 105% for the three TPU layers and the first PLA layer
Supports: No
Printing surface: Prusa textured steel sheet
Filaments: PRILINE for the TPU, various brands for the PLA
Check out the other versions of this design:
Circular version - https://www.prusaprinters.org/prints/66554-tpupla-hybrid-box-circular-version
Heart version - https://www.prusaprinters.org/prints/66556-tpupla-hybrid-box-heart-version
Card case version - https://www.prusaprinters.org/prints/66718-tpupla-hybrid-box-card-case
You can find more details on my website 3dprintedman.com! I put up a full article dedicated to designing and printing these boxes.