1 / 3
Washing Machine Discharge Strainer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hooks on edge of utility sink to catch hair & debris that the washing machine filter misses. Attaches to 1" drain hose.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 294
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first upload so any and all comments are welcomed. I designed this in Inventor. If you would like the .ipt files, please reach out.
I have ran about half a dozen loads of laundry through it and it seems to be working as intended and drains faster than it fills up. Attaches to the end of a standard 1" discharge hose.
Printed on my Ender 3v2 in PLA Pro. Bracket was set to 40% infill and the “filter” was set to 100% infill. Supports required on the bracket.
Cheers!