Ergatta Power Button Pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The power button on the back of the Ergatta tablet is in the middle of the back and needs to be searched for. This…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
The power button on the back of the Ergatta tablet is in the middle of the back and needs to be searched for. This lever makes it a cinch to located without fumbling around the backside of the tablet.
Just apply some double-sided tape to the rectangular pad and align the pusher "nub" with the center of the power button and attach. Most of the flex will be in this tape. Mine was ~1mm thick. Thinner would probably be better.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50%
Filament:
Esun PLA+
Notes:
Print with "nub side" up. I change top and bottom layers counts to create a 1.5mm top and bottom thickness to improve stiffness
Category: Sport & Outdoors