Train Benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new style of Benchy Print Test — A train. Model is designed to be a printer test. Requires supports.
- Ocena
- 5 / 5
- Polubienia
- 233
- Pobrania
- 3800
- Wydruki
- 16
- Wyświetlenia
- 10 269
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple 3D model based on the Benchy concept. It requires supports, so you can test your printer's support capabilities too. Below, you can see some things to look for in the print.
Rounded Faces
Test how your printer does with built-up rounded faces, overhanging rounded faces, and straight rounded faces.
Overhanging Travel
Test how your 3D printer does on overhanging travel (drool).
Overhangs and Arches
Test your printer's capability to print overhangs and arches.
Symmetrical Model
Test your printer's levelness and see how it does as far as skew.
Sloped Surfaces
See how good your printer is at printing slopes. The smokestack is an inverted slope, while the cowcatcher is a typical one.
Bridging
Find out how good your printer is at bridging. The bottom overhang can be printed with supports, but the top overhang should be printed without them.
Enjoy the model, and happy printing!