Winter plugs for Gardena Hoses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have installed a watering system all around my garden so that, during spring and summer, I can water automatically…
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 306
- Wydruki
- 3
- Wyświetlenia
- 1093
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I have installed a watering system all around my garden so that, during spring and summer, I can water automatically at night.
Everything is managed thanks to a Gardena® multicontrol water computer and an automatic water distributor that deals water over five different zones according to a schedule I set.
When cold days come, I store the watering devices in a shed but the hoses remain outdoor, lying on the soil. I just wanted to prevent mud and bugs from crawling inside.
So here are two plugs just for this. One for big 19mm diameter hose connector. And a smaller one for 13mm models.
The plugs mimic a male model and they click in the female connectors just like a regular male unit.
Just to be clear: they are not supposed to prevent water from flowing out, They are just made to keep dirt out.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
No
Resolution:
0.3 (draft)
Infill:
15%
Filament:
Prusa PETG
Notes:
Prefer PETG for outdoor resistance.
Category: Outdoor & Garden