Low Poly Rhino Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the Rhino to be a coat hanger.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 83
- Wydruki
- 2
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am searching for wall hooks for our kids, which are a bit “for kids". So i remixed in prusaslicer. I took the Rhino from Rob3D, cut the head off, added a modifier to make a whole in the back and placed the 25mm hanger insert from Lucian Brandus into it.
The Rhino is quite pointy, so i hit the horn and the ears with sandpaper to make it a bit duller. The clothes should not be pierced instantly.
I hope the 3mf format works, let me know if not. Thank you.
Printed in PLA, 0.2mm Layers with 10%infill Grid, with a 0.4mm nozzle and all this on the prusa mini+. Support for the ears, which breaks away really easily.