Creality K1C Door Spacer with improved Airflow for K1 + K1 Max
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1C Door Spacers with a built-in clip and improved airflow Vents For K1 and K1 Max
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 451
- Wydruki
- 3
- Wyświetlenia
- 6592
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hi guys,
I've been printing a lot of PLA lately and I noticed with the door closed, the chamber was getting way too hot and it was affecting my prints.
I didn't want to remove the door or have it swinging open all the time so I designed these clip-on door spacers. It has Vents for Airflow and a built-in clip so the door can be locked in place but still be opened with ease if needed.
There are 4 parts.
I've labeled the parts, Starting from the top, 1 to 4.
4 being the last one on the bottom.
For print settings, I used my Orca Slicer Profiles for PLA, the updated version that I just uploaded.
Just changed the layer height to 1.6mm.
Now my prints are coming out super clean thanks to the fresh air from outside the chamber.
If you need a good Calibration Cube to test out, My go-to Cube is this one (Deathly Hallows Calibration Cube)
Happy Accident, I ended up creating the K1C door vents before they even came out. I guess great minds think a like.