Shotgun Shell Holder / Side saddle (12 & 20 Gauge)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shotgun shell holder in different versions (variable width, 2 to 6pcs) for velcro fastening.
- Ocena
- 5 / 5
- Polubienia
- 216
- Pobrania
- 1838
- Wydruki
- 4
- Wyświetlenia
- 9535
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Summary:
There are various version of this simple shotgun shell holder / side saddle available.
On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers (Black) - The other one (not mounted) is Prusament PETG Galaxy Black.
Check the Key below to select the correct model for your shotgun:
| 12G_4pcs_25mm_straight_velcro | 12G = Caliber (12 Gauge) 4pcs = Capacity 25mm = Width straight= Straight shell direction/position velcro = Mounting |
Note: The length per shell capacity is 25mm (on 12G Version).
For example, the 2pcs version has a total length of 50mm. The 3pcs version 75mm and so on.
Printing instructions:
Use PETG
Perimeters: 3
Solid layers Top & Bottom 5
Infill: >25%
No Supports
Note: Place the shell holder on the heat bed in the same direction as you would mount it.
Fastening:
Velcro Strip
(I used tesa On&Off extra strong)
Note: Use the “Loop”-side (German: Flauschband) on your gun and the “hook”-side (German: Haftband) on the holder. Btw: loop is the soft side, hook is the harder side of the velcro strip.
Outro:
The shell fit is quite tight and needs to wear in a little. Let me know about yours!
Happy printing and let me know if you need further information or instructions.
Btw:
If you need a specific size or caliber, do not hesitate to write a comment.