Elegoo Neptune 4 Pro ADXL345 X Axis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small and secure ADXL345 X axis mount designed for the Elegoo Neptune 4 Pro.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 468
- Wydruki
- 6
- Wyświetlenia
- 4019
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
An X axis mount for the ADXL345 inspired by @FLYNINDUSTRIES's bed clamp mount.
This mount was designed for the Neptune 4 Pro but may work on other models leveraging the metal guide rails.
Please note that someone has explicitly tried this on the regular Neptune 4 and would not fit due to that printer using POM V-guide rails, resulting in the print head sitting lower on the x gantry.
This leverages heat set inserts to ensure the ADXL345 stays secured. Simply remove the cable fastener on the print head and attach this mount.
Bill of Materials:
- 2x - Heat Set Inserts (M3x5x4)
- 2x - M3 4mm cap head bolts for mounting the ADXL345
- 2x - Original M3x16 screws used for the cable fastener
Print Settings:
- 4 Perimeters/walls
- 15% infill
- 0.2mm layer height
- 0.4mm line width
- 5 top and bottom layers
- Parts are pre oriented in the correct position for printing
- No supports needed