1 / 3
FILAMENTORY, the filament inventory (WIP)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cute little inventory that makes use of common empty filament spools.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Filamentory (filament + inventory) is a compact little desktop drawer that reuses spent filament spools as a baseplate, and is designed to look exactly like… an unused spool!
You will need 4pcs of 10 x 5 / 2t magnets, and a 608zz bearing per make.
Check that your spool diameter is approximately 80 mm wide in the center. (not the hole diameter!)
INSTRUCTIONS
- screw in the screw module on a spool.
- insert the magnets in the drawer and the slide base. a drop of superglue might help.
- slide in the base plate on the spool, the drawer and the watering can into the baseplate.
- fit a 608zz bearing into the Feet module, and put the spool on.
- plant a little succulent friend on the center module.