Pentel EnerGel Alloy broken push button replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The push button of my Pentel EnerGel Alloy (RT BL407S-A) snapped off someday, and I lost it somewhere in my school…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
The push button of my Pentel EnerGel Alloy (RT BL407S-A) snapped off someday, and I lost it somewhere in my school when it was in my pocket.
I found that the caps from Pilot G2 ink refills with the open end chopped off near the taper works pretty well. So I designed a placement push button for it with some measurements from the G2 refill cap
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Filament:
Creality HP-PLA PLABlue
Notes:
Before printing, change the orientation of the model to have the flat top to be on the print bed in your slicing software
I was using a chopped off cap of a pilot G2 refill as the push button.
But it split, so I just took the measurements of the opening which fit perfectly to the pen and designed this without the taper
Category: Office