1 / 5
Bambu Lab P1S spacer for rear spool with PTFE routing hole — zdjęcie 1
1 / 5

Bambu Lab P1S spacer for rear spool with PTFE routing hole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Give more space to the rear mounted spool retention arm and route the PTFE tubing from your AMS

Ocena
0 / 5
Polubienia
6
Pobrania
63
Wydruki
1
Wyświetlenia
650
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I really liked the idea of combining the spacer and leading for the PTFE tube. But my P1S has a small knob on the filament holder. So I made a small modification to make everything fit nice, tight and flush.

 

Recommended settings
Material: It's up to you, I used ASA
Layer height: 0.16
Perimeters: 5
Infill: 60%
Infill Type: Gyroid (or something similarly strong)
Supports: No

Tagi