1 / 3
Engineer Bowtie
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bowtie with rotating gears
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 330
- Wydruki
- 8
- Wyświetlenia
- 1788
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 8) (Komentarze: 10)Remiksy (0)Kolekcje (113)Powiązane
This is a Bow Tie for Engineers.
The original was done by Etienne Gauvin at the link below.
https://www.thingiverse.com/thing:3466379
I have always got great compliments at weddings and functions wearing this as it is very unique.
I am uploading here on Printables to keep it in one place and because I made some tolerance modifications. I also resized it and fixed model errors.
Directions
- Print in two (or more) of your favourite colours
- 1x Base
- 1x Top
- 1x Loop
- 2xLarge Gear
- 1x Small Gear
- Snap fit together depending on printer tolerances. (You can always drill the holes of the gears and cover bigger to fit. Rather too tight than too loose)
- I always add a dab of super glue just to make sure it stays together, dance floors are a different game….
- Thread a ribbon through the hoop, I would use a wide ribbon and squeeze it through to give more stability, but up to you.