Replacement Toy Piano Keys for Mello Ely Tone (Black keys coming soon!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Literally what the title says!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
All the keys are labled to where they go! For small 3d printer users, just turn the key by 45 degrees in any direction and place it in the printable center!
To access the mechanism behind, unscrew the screws shown in the last 2 pictures, then pull out the thin metal sheet and quarter inch piece of wood, pull out the broken keys (For full restoration, remove all the white ones!
The black keys don't tend to break as easily as the white ones! But I still need to design the black keys and the End F key!
This might work on some other toy pianos, but I'm not too sure..
Print with any filament besides FLEX!
If notes are missing, just cut a 1/8 inch metal rod and shape it like the notes!
Felt is optional! (Most recommended if you want the piano to last a lot longer!)