1 / 14
Dual 5015 blower duct for Ender 3 V3 SE — zdjęcie 1
1 / 14

Dual 5015 blower duct for Ender 3 V3 SE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TL;DR stock printers use: Duct_Left_Normal_Height_V2.stl Duct_Right_Normal_Height_V2.stl

Ocena
4,882 / 5
Polubienia
279
Pobrania
1753
Wydruki
19
Wyświetlenia
14 448
Oceny
17

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Yes, A remix of a remix.

TL;DR stock hotend printers use:

  • Duct_Left_Stock.stl
  • Duct_Right_Stock.stl

⠀

I really liked the shroud and my V3 SE was lacking in the cooling department. so after 4 test prints and a bunch of measuring I present the Dual 5015 blower for the V3 SE.

Please forgive my poor modeling skills I use sketchup so it's not perfect but it's functional-ish.

I used extra X axis motor screws from a kit, the left side you can use a larger diameter screw and tap threads into the plastic for the fan if you don't have a nut compatible with the motor screws. For the right side the extruder screw is roughly 5mm too long I used a plastic washer you can always use the right size screw too I didn't have one, the hole is shared by the fan and the bracket for mounting.

Tagi