1 / 3
Customisable battery organizer for AAAA, AAA, AA, C, D, 18650, LR44 and much more (Vase mode possible)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customisable battery organizer done in openSCAD. Both the dimensions of the grid and the battery's can be changed.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 554
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (20)Powiązane
Battery organizer
To customise battery organizer you need to download the program from the OpenSCAD - The Programmers Solid 3D CAD Modeller website and run the tile_grid.scad file.
You will see that you have 3 groups of parameters:
- Battery type
- The predefined battery type: AAAA, AAA, AA, C, D, 14500, 18650, 21700, 26650, Coin Cell, 4LR44, LR1, CR123A, Manual
- Height of the battery (16mm)
- Height of the base (0.8mm)
- Grid dimensions
- Number of columns, is set to 3
- Number of lines, is set to 3
- Wall thickness (0.4mm)
- Manual overwrite
- Battery diameter, when battery type is manual it take this value, is set to 0 mm
- Insertion gap for the batteries to allow smooth insertion, is set to 0,2mm
- Gap between batteries, is set to 2 mm
- Vase mode
- Default is activated
Slicer Settings:
Printer: Anycubic Kobra 2
Supports: No
Brim: Yes, separation gap of 1mm
Resolution: 0.2 – first layer: 0.2
Infill: 15%
Filament: PLA
Notes
These models and openscad source file can also be downloaded from github