1 / 10
Meta Quest 3 Knuckles - Controller Grip Strap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Valve Index controller styled strap for the Meta Quest 3 controllers.
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 378
- Wydruki
- 4
- Wyświetlenia
- 4304
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 4) (Komentarze: 9)Remiksy (0)Kolekcje (115)Powiązane
After searching for a knuckle strap for the Quest 3 controllers I couldn't find any to buy or print which i liked. So i decided to modify the model of SSpt to get a feeling like with the strap on the Valve Index Knuckle controllers which I loved. The result of my design feels for me very similar to the Valve Index Controllers (Valve Knuckles).
Instructions:
- Print all parts in the uploaded orientation in 0,15 mm layer height.
- Lid parts should be printed with standard support
- Strap should be printed with Arachne Perimeter
- Cord holder
- can be printed without support, but better print it with support here
- print with 100 % infill
- can be printed without support, but better print it with support here
- For connecting the Strap to the cord holder, use elastic cord of 3 mm diameter (e.g. https://www.amazon.de/dp/B07FK152QV?ref=ppx_yo2ov_dt_b_product_details&th=1) - approximately 2 x 240 mm long
- For connecting the strap to the lid, use an inelastic cord (feels better than elastic to me) - approximately 2 x 65 mm
- Only tested in PLA (especially for the cord holder, PLA has better springiness than PETG)
- For more comfort, glue some kind of textile on the bottom of the straps with double sided tape - I used softshell textile (thickness ~ 2 mm) I found in the closet of my girlfriend - feels super nice, any other textile should also work