Bambu Lab Minimalistic Lid Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic lid riser designed for Bambu Lab P1S printer, also in XL size. UPDATE: Now smaller STL files.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 543
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: I realized the STL files were massive (my bad), so I replaced them and added STEP files as well.
This lid riser has been designed for a Bambu Lab P1S printer, using the existing bolts in the inner side to guide and maintain the riser in place.
Feel free to use PLA or PETG, 0.6mm top & bottom, 2 walls and infill % of 20 or higher, no need for supports (check bed picture for orientation).
I've added another XL version, for massive prints that need faster cooling. The first picture shows the XL version with the AMS on top. The AMS doesn't slide because it's fixed, thanks to jakob's AMS Flipper ( https://makerworld.com/en/models/1363398-ams-flipper-better-access-to-your-p1s-x1c#profileId-1770033 ) and a replacement I made for the rear right handle ( https://www.printables.com/model/1395533-rear-right-handle-for-external-spool-use-compatibl ).