Le GTS ( le grattoir-triangle des Siezes) - Ice scraping tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple, and efficient ice scrapper. A sturdy and ergonomic handle is provided for those who don't wear gloves
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I live in a place where snow, wind and cold are present for 4-5 months in a year, so an ice-scraping tool has to be efficient, as i have no garage. So there it is !
Features :
- Coarse and fine toothed scraper for the thick ice. Use the coarse one then the other, it's a real ice-killing stuff !
- Smooth scraper for the finishing or thin ice
- Tiny smooth scrapper for your backview mirrors or windshield angles
- Windshield wipers cleaners
- Optional handle that is easy to put on and remove, so you can switch the side of the tool quickly
- It’s big enough to be practical and efficient, small enough to find a place in your car ;-)
The handle
(very optional to me, but some people in my near neighborhood like to use it)
Just insert the tool in it, the first time should be easy unless you have a lot of stringing. The triangle fit should snap perfectly in the triangle hole of the tool.
To remove the tool, just push on the central triangle from the bottom with your thumb and pull the tool out.
Printing
Everything with 0.2 layers, 3 or 4 perimeters, 5 layers bottom and top, nothing more to be said here, this is an easy print.
The handle has to be printed on her side, supports are needed just for the bottom groove (check the picture), a brim could be useful.
PETG is my favorite for this one.