1 / 2
Eye Of Ra Amulet (Inspired by Stargate)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my best attempt at making a replica Eye of Ra amulet prop replica
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
This is my attempt to make the amulet that brought daniel jackson luck on his adventures through the stargate in the original movie. It should be printed in silk PLA. You might try slicing it in half through the side and gluing it afterwards. It should be strung with lots of gold beads like in the photo. It will look best at as thin a layer height as possible. Alternately, print in resin and paint gold.