Shotgun Safety Flag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is V2.0 of a parametric design for a single barrel shotgun safety flag in sizes from 12 gauge to .410
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
This is V2.0 of a parametric design for a single barrel shotgun safety flag in sizes from 12 gauge to .410, aimed (ahah) primarily at users of pump action and semi-automatic shotguns but useful for break actions and large calibre rifles.
There is now an improved V3.0 which uses more plastic but is more robust: https://www.printables.com/model/729798
Its main advantage over other designs is that the lug that goes down the barrel is split down the middle. Should a bit of the flag break off, the thin fragment will not cause a bore obstruction and will most likely fall straight through the barrel.
The embossing on the flag can be changed to indicate the intended calibre.
NOTE: Guns vary. If your flag is too loose or slick in the chamber, warm the base of the flag up and gently stretch the two arms apart a bit more.
A .410 safety flag will also conveniently fit the chamber of a .45-70 rifle.