SSUPD Rear Displayport Faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw all the different IO mounts for the SSUPD Meshilicious and want something just slight different. Originally design…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Saw all the different IO mounts for the SSUPD Meshilicious and want something just slight different. Originally design it with (3) DisplayPort opening but due to the GPU support bracket that comes with the case I couldn't get the third adapter in the card and settled on (2) ports at the back of my case.
If anyone wants the original (3) port design. Message me and Ill post it, just need to revert the file back to its original design.
As always, original Solidworks file included. Remix as you please.
Print Settings
Rafts:
No
Supports:
No
Infill:
50%
Notes:
Again, I tend to use 4 walls, its just a personal preference. Can DEFINITELY get away with (2) walls.
I chose 50% infill so I couldnt really tighten the mounting screws and not worry about the part caving in around the screw holes but realistically you can do 15-20% infill.Category: Other