Tripod Head - Hama Star 61
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tripod head replacement for the hama star 61
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 188
- Wydruki
- 0
- Wyświetlenia
- 1804
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
The tripod head was broken lengthwise. For the repair, I only replaced the head (in yellow). The rest of the parts could be reused. The tripod head is connected to the rest of the tripod by a 40 mm M6 screw. The screw was glued into the plastic and had to be broken out. The bubble level was also glued in place and had to be broken out as well.
For a good printing result, I recommend printing some supports around the hinge.
Post-Processing
The clamp lock is fixed with a screw. The hole of this screw must be broken manually after printing. I only printed one layer, which can be broken through with a bit of force using a pointy object (i.e., screwdriver).