Bambu Lab Purge Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim & tall purge bucket for Bambu Lab printers. Held with four 8x3mm magnets. Tested on P1S, should also fit P1P & X1.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 331
- Wydruki
- 3
- Wyświetlenia
- 1546
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
One more purge bucket design proposal for Bambu Lab Printers – inspired by the design of the P1S and X1 printers themselves and several other purge bucket designs on the net.
Tall enough to stand on the desk behind the printer, slim footprint to take up only little space. Held to the metal back of the printer by four 8x3mm magnets. The two noses help aligning the bucket with the port on the printer.
The design with ~1.2mm wall thickness is optimized for fast printing with a 0.6mm nozzle using the default settings in Bambu Studio – takes less than 1 hour using Bambu PLA Basic.