Mini-RT4K Housing for YC2VGA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing to secure the YC2VGA board by Zaxour in a nice looking mini-RT4K shell
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
YC2VGA
This is a model made to go with Zaxour's YC2VGA board, which allows for connecting Composite and S-Video to the RetroTink 4K via a VGA cable.
Printing
You'll need to print the shell halves with supports, so the cover slide rail is held up (otherwise, the doors wont slide across properly!).
Make sure to print the Spacers twice.
You can print the logo in a different colour for some nice variety, but depending on your printer calibration, it might be a bit loose - in which case you can secure it with a drop of glue.
Other
To secure the shell, you need 4x M3x18-25mm screws (Flat Head Machine screws, anywhere between 18mm to 25mm works - 20mm is advised).