1 / 1
Pastamatic Leadscrews for 60mm and  80 mm Spools (e.g. Filament PM, Prusament, Prusa, Redline Filament) — zdjęcie 1

Pastamatic Leadscrews for 60mm and 80 mm Spools (e.g. Filament PM, Prusament, Prusa, Redline Filament)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remixed the original leadscrew for my needs.

Ocena
5 / 5
Polubienia
35
Pobrania
381
Wydruki
4
Wyświetlenia
1769
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

60 mm (tested): 

  • Prusament spools (perfect winding)
  • e3d Edge spools (3dbuddy seems to have identical spools, untested) ok-ish
  • thinner Spools do not work perfect. they get out of anlinghment (see my post in the coment section)

80mm Spools (tested):

  • Filament PM
  • Prusa (not Prusament)
  • Redline Filament
  • Amazon basics, work ok-ish

Please notify: there is a design flaw in Original design. i have to take the thicknes of the spools into acount. Every new design for leadscrews implements like 4-5 test printed iterations to get the perfect anlignment. I can do this only with spools i own. But feel free to ask for other versions of this leadscrew, i will try best. 

 

Continious esting as work in Progres for this design. But i focused on 60 mm Prusament spools for my filament Storage.

 

History:

  • Added…_v2.stl for 80 mm. I Adusted the leadscrew windings more to the middle to fit the position of the spool better.
  • Added 60 mm Prusament leadscrew.