1 / 4
Wen Lathe Tool Mount (For Wen LA8800 Lathe Stand)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple tool holder designed to hold your turning tools at arms reach. Prints without supports.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Designed to hold lathe tools for the Wen LA8800 lathe stand.
- No Supports needed
- STLs have been uploaded in print orientation
- 4mm mounting holes for nuts and bolts or zip ties (This is how I mount them in the pictures)
- Tool hole is 28.86mm in diameter. So as long as the end of your handle is bigger than this and the blade is smaller than the hole you should be golden.
- Modular design lets you print as many or as few as you need.
- I print mine at .8mm line width (thicker walls = stronger walls) and .3mm height for around 2.2hr prints at around 50g of filament
Don't forget to share your builds!
Enjoy!