Martini Lithophane Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lithograph lamp featuring Martini glass clipart that would be great in a bar setting
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple lamp made as a gift from a piece of clipart turned into a lithophane at Image to Lithophane (3dp.rocks). The piece of clipart is hard to credit as I've seen it on different sites with different terms, but this is one place to find it https://clipground.com/pics/getsecond?url=cocktail-glass-clip-art-17.jpg
I printed the body on a MK4 using a 0.6 nozzle, 0.32 SPEED profile and generic white PLA with 100% infill. A larger layer height and 100% infill help with light transmission.
The base can print with default settings and I used a MK3 for that. The base is designed to fit this particular LED puck light https://www.amazon.com/Lvyinyin-Cabinet-Lighting-Non-dimmable-Daylight/dp/B08NJKTSZ2 and the channel allows the cable to extend without being pinched. The light is attached using the included adhesive sticker. (IMO the lights are a bit expensive, but they produce a nice result and they have their own plug/switch, which makes them good for gifts)
The base is designed to snap into the body without needing any glue, so it's a tight fit, but the top is chamfered for easier insertion.
Hope you enjoy!
Not providing any commercial use license as I can't 100% vouch for the clipart. (one hosting site said OK for personal use)