1 / 2
CO2 bottle holder for 500g with hole at the bottom for easy removal
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the CO2 bottle holder from Dawnbreaker84 but with a hole in the bottom so it's easier to remove.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the bottle holder made by Dawnbreaker84 but with a hole in the bottom so air can easily get in when replacing the cylinder. I'd also recommend to print this 1% larger if you don't want it to be too tight fitting.
