Voron V0 Meanwell PSU Terminal Cover (Side mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of @loicloic's terminal cover that doesn't require threads underneath the PSU for LRS-100-24 and LRS-150-24
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 605
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
@loicloic made a lovely terminal cover for the V0 PSU. However it seems to rely on screwing into a threaded panel underneath the PSU - while the standard v0/v0.1 instructions have you mount the PSU directly to acrylic with a nut on the PSU side (no threaded parts). This remix changes the terminal cover to accommodate a nut at the bottom - and mounts to the PSU using a M3x5x4mm heat set insert (from the standard V0 BOM) on the right side instead.
Compatible with LRS-100-24 and LRS-150-24
Requirements
- 1 M3x5x4mm heat set insert
- 1 M3x8mm screw
Suggested Print Settings
Standard Voron print settings work well:
- 0.4mm
- 4 Walls
- 5 Top/Bottom Layers
- 40% Gyroid infill
- ABS or ASA
