1 / 2
Anon snowboard helmet goggles band clip — zdjęcie 1
1 / 2

Anon snowboard helmet goggles band clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I present to you the spare part every snowboarder will probably need at some point, the clip holder for the ski goggles

Ocena
0 / 5
Polubienia
10
Pobrania
212
Wydruki
0
Wyświetlenia
1235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Winter Sports
Licencja
Creative Commons — Public Domain

We have two Anon helmets, they are pretty good, but the goggles clips from this model don't come with the screw or anything else that keeps them in place. So after a couple of seasons, we ended up losing both.

Since Anon was purchased by Burton, no spare parts could be obtained for this model, hence I decided to make our own. I have done it in Tinkercad, feel free to copy it if you need to edit to your needs:

https://www.tinkercad.com/things/fol6iMEmBGL

I printed this part with a Bambulabs P1P, using the strength profile and no supports. With these settings (6 wall loops wit no infill, 0.2 layer high), this ended up printing each clip in about 15 minutes and the part is quite flexible and strong with recycled PLA.

Tagi