Aldi Coffee Pod Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aldi Coffee Pod Holder designed to be printed lying down with no supports. 200 x 202mm To fit most 3D print Beds.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This Aldi Coffee Pod Holder is designed to be 3M'd to a flat surface (or use bluetac) and to hold Alid Coffee Pods. It's thin and light weight and designed to be printed on most 3D printer beds with a surface area of 200x202mm and 12mm tall.
Print lying down with no supports, the groves have been designed with an angle that most 3D printers can print on without requiring support. You may have to disable brim depending on your bed size.
My Print Settings:
Layer Height = 0.2mm
First Layer = 0.28mm
Perimeters = 3
Solid Layers Top = 5, Bottom = 4
Infill Density = 15% Grid
Brim = 5mm Outer brim only