Bobble MERRY CHRISTMAS glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MERRY CHRISTMAS glasses with funny bobbling letters. Fits on Prusa MINI.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 249
- Wydruki
- 4
- Wyświetlenia
- 748
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another party glasses model. This time with MERRY CHRISTMAS bobbling letters.
Short introduction video about the earlier model - “HAPPY BIRTHDAY” glasses https://www.printables.com/model/375385-bobble-happy-birthday-glasses.
There are 3 versions of the frame in the files:
- “frame_MERRY CHRISTMAS_0p4mm” - 0.4mm thick springs (recommended for PLA)
- “frame_MERRY CHRISTMAS_0p6mm” - 0.6mm thick springs (recommended for PETG)
- “frame_MERRY CHRISTMAS_0p8mm” - 0.8mm thick springs (just in case)
I tried all these thicknesses and 0.4mm is the best in my opinion for PLA. The letters wobble nicely when moving your head. 0.6mm suits PETG better.
Printing recommendation (also see .3mf file for printing orientation):
PLA, 0.2mm layer, 2 perimeters, 15% infill (nothing special). For the temples use 3mm brim.
Post processing (also see the video above):
- Remove glasses from bed (be careful with the letter springs).
- Remove the brims (clean the edges).
- Remove user supports (inside temple revolute joint).
- Adjust the hole diameter.
- Insert filament and cut the length.
- MERRY CHRISTMAS !!!
Also check out:
https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA
https://www.cgtrader.com/rorys3d