Jingle-Bells
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jingle Bells Holiday Decoration
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a little decoration for the holidays. My wife loves putting little signs around and after looking at one of the ones she had I decided to make this one for her. She loved it! ;-)
There is nothing special about this, use whatever you want to make it however the gcode files are provided for PLA.
I didn't print the base for this because I already had something I could use. You can so the same if you would prefer. The base included with this must be printed on it's side due to print surface limitations. Be aware that you will need supports if you decide to print the base.
When slicing, pause at layer 26 and do color change to highlight the “Jingle”.
Here are the settings that I used:
- .20 mm layer height
- .4 mm nozzle
- 10% infill
- Rafts: No
- Supports: Yes (for base only)
- 2 perimeters
- 3 Layers top and bottom
Happy Holidays!