Axial Ryft RBX10 - Fuel Cell GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Axial Ryft RBX10 fuel cell mounted GoPro mount.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Axial Ryft RBX10 fuel cell mounted GoPro mount. You'll need go regular GoPro screw and captured nut; otherwise the stock screws should be ok. Though a little longer (10-12mm) would also work.
Supports shouldn't be needed, though you'll also want to make sure you have the model oriented so that the fill lines are length wise over the hex pattern (shown).
Update: 5/30/21:
V2 uploaded; should be much stronger for anyone that has breakages like me on their first run out. Also screw hole updated to fit a regular M5 bolt (vs the GoPro twist bolt). Since depending on mounting the GoPro bolt won't fit. You'll need a M5 x 20mm bolt.
-
V1.1 - Minor layout updates and rounded corners of the base.