kobra2 skr pico pi4 cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
my kobra2 conversion, btt skr pico and pi4 cover to replace the stock mainboard housing for klipper conversion
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 666
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
my kobra2 conversion, btt skr pico and pi4 cover to replace the stock mainboard housing for klipper conversion
this will fit kobra2, kobra2 pro & kobra2 plus
may fit kobra 1 std but i do not have that machine to confirm
print using organic supports, will need m3 screws & knurl nuts
i have also added extra standoffs in the model to assist in mounting other hardware and wire segregation just add extra knurl nuts where you need them
i would recommend using spacers under the legs to raise the printer 5mm for extra fan clearance but its not absolutely necessary i don't use them
Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)