1 / 3
Honor of Kings Logo Lightbox LED Lamp王者荣耀灯箱 — zdjęcie 1
1 / 3

Honor of Kings Logo Lightbox LED Lamp王者荣耀灯箱

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 3D model of the light box features the logo of Honor of Kings.

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This 3D model of the light box features the logo of Honor of Kings.

 

WARNING!

- Remove purge line at the beginning of the print!
 

Materials and tools:
- aluminum tape
- Led strip: simple 1m white led USB

- nano paste

 

RECOMMENDATIONS

- use a textured PEI sheet
- use the printer profile, it has quite a few setting changes that help achieve the best results
- already make a hole in the file

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%

Tagi