Grand Kaleidoscope Teardrop Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An elegant new ornament design for the holidays
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 557
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I've re-envisioned my Grand Kaleidoscope Ball as a teardrop, going back to my original files and redesigning it from the ground up.
The ornament looks dramatically different from each angle. I've printed it here in 2 pieces. The first 3 photos show it printed in TTYT3D Shiny Red then accented with Rub N Buff Gold Leaf. Thanks to @Linefeed for letting me know about Rub N Buff. The next 4 photos show it printed using a dual color filament - MatterHackers Quantum Raspberry Gold.
I've provided STLs of the design for both the whole ornament and the two pieces. It can be printed as a single piece, but that would require a lot of supports and wouldn't print as cleanly as printing as two pieces.
It can be a challenge to slice this so that it prints cleanly and weighs relatively little, so I've provided my PrusaSlicer 3MF files and GCODE for a Prusa MK3S+. My final print is just 28g.
I've used Height Range Modifiers in PrusaSlicer to vary Perimeters, Infill, and Top/Bottom settings so that the model has extra structure where it needs it - and no where else. Most of the ornament prints with just 1 perimeter. I've only added infill to layers that are unsupported or areas that need reinforcement. I used Organic Supports for the top. The bottom piece doesn't need any supports.